Horizontal autoclaves OSMANLI MAKINA (Turkey)
To the attention of the company's management
Commercial offer for a sterilizing horizontal autoclave:
OSMANLI MAKINA brand OSM 2 A 2750
OMS2AUTO2750 (Ø 1400)
Commercial offer for a sterilizing horizontal autoclave:
OSMANLI MAKINA brand OSM 2 A 2750
OMS2AUTO2750 (Ø 1400)
Made of stainless steel AISI 304 L. . The body is covered with mineral wool and stainless steel sheet to provide thermal insulation. PLC system control and management. To reduce water consumption to a minimum, an ALFA LAVAL heat exchanger is mounted on the machine. Special spray nozzles provide the fastest possible temperature change at all points of the autoclave. The pressure in the autoclave, air supply, water level, steam supply and pressure are controlled and controlled from the PLC touch screen mounted in the autoclave control panel. A specially developed program for OSMANLI MAKINA provides control and monitoring of the autoclave operation mode. Registration of pressure and temperature in the autoclave is carried out by a device with a roll chart. The control of the safety parameters of the system during sterilization is carried out electrically, mechanically and pneumatically at the same time.
1.1a. Autoclave baskets. Stainless steel AISI 304 L 980X980X920mm
1.1b. Carts for baskets. Metal, painted.
1.1c. Stainless steel basket guides
Some functions and features that are not available in similar autoclaves:
- Compliance with international certificates and EU standards (Design of electrical circuits, electronic devices, controllers, installation of taps and valves.)
- PLC touch screen control and management. LG.
- Printer with memory card. (512 Mb) ABB.
- Alfa Laval heat exchanger (To reduce the consumption of water and chemical inhibitors of tin metal). In addition, the heat exchanger does not allow a sharp decrease in pressure during the operation of the autoclave.
- Special irrigation - showering system. Shower from five points.
- The presence of an air pusher on the lid of the autoclave provides increased tightness of the door closing and increases the life of the door gasket.
- Valves for air, steam, water and water discharge in cooling proportional type. (not on-off)
SPECIFICATIONS
Capacity: 1620 RMS 0.5.
Dimensions : 2900x2065xh2400mm
Weight : 2450 Kg.
Pump type and power: CALPEDA. 7.5kw.
Heat exchanger : ALFA LAVAL
PLC : LG
Electronics and recording device : SİEMENS/ABB/TELEMEKANİK./LG
Cranes : SAMSON/TERMO/AYVAZ/
Cooling water consumption : 2 to 4 cubic meters
Steam consumption : From 500 to 1000 kg/h
The consumption of water and steam depends on the manufactured products and can be calculated for you individually, before purchase.
OTHER SPECIFICATIONS:
- Insulation: Body covered with 50mm mineral wool and 0.5mm AISI 304 L stainless steel sheet.
- Heat exchanger: ALFA LAVAL
- The autoclave is equipped with all necessary security systems. Safety valves, electronic and mechanical measuring instruments, vacuum switches, etc.
- Closing of the autoclave door during its operation is controlled by a manual mechanical system and a sensor system mounted on the door. All necessary measures have been taken to ensure that the lid does not open under pressure.
- During a power outage, the machine continues to run from where the program stopped, but for long-term power outages, it is necessary to use an electric generator. If the mains frequency fluctuates, it is necessary to use a voltage and frequency stabilizer.
- The autoclave has a filter at the pump inlet, but the user is still obliged to use purified and softened water for the ALFA LAVAL heat exchanger.
- Provided technical documentation and user manual.
- All equipment and materials comply with international standards.
- Safety valve: TERMO, spring loaded safety valve. Setting for actuation - 3 bar.
- Level control: AYVAZ MG33, magnetic, level control sensor.
- Printer: ABB recorder type SM502FC, SD CARD MEMORY 512Mb. 4 channels. Records pressure and temperature.
- Valves: air, steam and water inlet, pressure relief valve, SAMSON GERMANY
- PLC (controller): LG touch screen control panel.
- Approximate steam consumption 1800 - 2200 kg/h
- Water consumption from 2 to 4 tons for each cycle.
№ | Name | Quantity | Price / euro |
1 | Autoclave OMS6AUTO2750 | 1 | - |
2 | Basket | 4 | - |
3 | Cart for baskets | 4 | - |
4 | Basket guides | 1 | - |
TOTAL: |
| 56500 |
Additional options
2.1 Accessory: 1 set, 1.600 EUR. At the inlet of water, steam and air - filters
2.2 Vibration system: 1 piece, 7.500 EUR. Vibrating system inside the autoclave for sterilizing dairy products.
2.3 Automatic basket loader: 1 piece, 8.000 EUR. Autoclave-mounted automatic basket loading and unloading system.
2.4 Separator: 100 pieces, 32 EUR 3200. Polypropylene separators
Price FOB Odessa
TERMS OF PAYMENT
Direct contract with a Turkish company. 50% within 3 banking days from the date of signing the contract, 50% before shipment from the manufacturer.
DELIVERY TIME
Delivery time is 55 calendar days from the date of receipt of the first payment to the manufacturer's account.
Commissioning works are included in the cost of the autoclave. The obligation of the customer's enterprise to supply air, steam, water, 380V to the autoclave, to ensure the discharge of water into the sewer.
Warranty service, as well as commissioning works are carried out by the enterprise
VMU LLC, which is the official representative of OSMANLI MAKINA in Ukraine and Moldova.
OSMANLI MAKINA tel (90-266) 791 61 11, 90 530 783 49 25
TOV "VMU" Director Julai I. G. tel.: 0938480729, 0398480683